ABB drive halts quarry production stoppages18 October 2019

An ABB variable speed drive has helped Hills Quarry Products to reduce pump failures and cut maintenance and energy costs.

Up to 1,200 tonnes of aggregate per day can now be consistently extracted by avoiding pump failures following the conversion of a fixed speed motor to variable speed control, according to ABB.

Aggregate production at Hills Quarry Products’ Cerney Wick site in Gloucestershire demands a high volume of water which returns to a sump for pumping to a settling bed. Float level switches in the sump activate a fixed speed pump. However, the fixed speed could be too high for demand, leading to the sump running dry and the pump failing. In addition, because the motor only runs at one speed, the stress on the pump set could lead to broken transmission belts, motor overcurrent or blocked pumps, leading to costly failures, typically every two weeks.

“The pump could be out of action for a few hours to a full day, depending on if it was a simple belt change or if the pump needed to be raised from the sump,” says quarry manager Olly Thompson. “We extract between 1,000 and 1,200 tonnes of aggregate every day at Cerney Wick, so any downtime is extremely costly – not just in terms of lost production, but also due to the extra expenses incurred by our maintenance team and external contractors.”

Following a recommendation from ABB Value Provider, APDS, a 55 kilowatt (kW) variable speed drive and level control device were installed to automatically adjust the pump motor’s speed according to demand. A pressure transducer, installed in the sump, monitors water pressure. The variable speed drive then calculates the water level that corresponds to this measured pressure, adjusting the pump speed to avoid overflows or the sump running dry.

“This system has reduced downtime, increased production and reduced the number of replacement drive belts as well as the cost of repairing the pump when it ran dry,” continues Thompson. “As well as avoiding failures and the associated costs, we have also cut electricity usage on the application by around 50% by matching motor speed to demand, achieving further savings.”

You may also be interested in:

Feature - The wheel deal

Feature - Bright sparks

Feature - Saving lives

Adam Offord

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.