Firm fined for workers’ injuries tackling factory fire28 March 2014

Two workers suffered burns, one seriously, when hot material from an industrial drier hit them as they tried to tackle a fire at a factory in South Wales, a court has heard.

The employees of Maxibrite in Llantrisant were trying to fight fire at the Maxibrite coal briquette plant on 16 December 2012 when they were hurt, one suffering severe burns to his back, legs and hands.

The incident was investigated by the Health and Safety Executive (HSE) which prosecuted Maxibrite at Pontypridd Magistrates' Court. The company was fined £20,000 and ordered to pay £5,115 in costs.

The court heard works manager Simon Gilbody and works engineer Andrew Price were alerted by staff who saw smoke coming from the top of a tower used to produce solid fuel.

After several attempts to control the fire by hosing the tower failed, Mr Gilbody decided an inspection hatch at the bottom of the tower should be opened to let out any dust that might be causing an obstruction.

A company employee, Carl Lewis, opened the hatch but hot cinders cascaded out, burning Mr Gilbody on the chest, neck and face but without causing serious injury. As Mr Lewis tried to close the hatch, he was himself engulfed by hot coals. After showering for 30 minutes he was taken to hospital and received skin grafts for severe burns.

HSE's investigation found Maxibrite had not carried out a suitable risk assessment for the safe working of the rotary drier and failed to provide a safe way of working including adequate information, instruction and training for workers using the equipment, and in procedures to follow in the event of a fire.

Maxibrite of Esh Winning, Durham pleaded guilty to a breach of the Health and Safety at Work etc Act 1974 and a single breach of the Management of Health and Safety at Work Regulations.

HSE inspector Steve Lewis said: "Mr Lewis and Mr Gilbody could have suffered far worse injuries or even death in this incident, which could have been prevented.

"The drying process at the plant involved intensive heat so the risks of fire should have been obvious. There had been a fire at the plant previously involving a similar drying process.

"Employers must make sure they have proper plans for dealing with emergency situations and that workers are trained to know what to do when something like a fire breaks out."

Ian Vallely

Related Websites
http://www.hse.gov.uk/toolbox/fire.htm

Related Companies
Health & Safety Executive
Maxibrite Ltd

This material is protected by MA Business copyright
See Terms and Conditions.
One-off usage is permitted but bulk copying is not.
For multiple copies contact the sales team.